Maintenance Guide

A dripping faucet can waste gallons of water and increase your utility bills. Here's how to fix it:

1. Turn off the water supply under the sink
2. Remove the faucet handle and cap
3. Unscrew the cartridge or valve stem
4. Replace the O-ring and washer
5. Reassemble and test for leaks

Upgrade your light switches or fix faulty ones with these safety-first steps:

1. Turn off power at the circuit breaker
2. Remove the switch plate and mounting screws
3. Disconnect wires from old switch
4. Connect wires to new switch (note colors)
5. Mount and test the new switch

Regular filter cleaning improves air quality and system efficiency:

1. Locate your air filter (usually in return duct)
2. Turn off the HVAC system
3. Remove the filter and inspect for damage
4. Clean with mild soap and water
5. Let dry completely before reinstalling

Achieve professional-looking results with these painting techniques:

1. Clean and prepare the surface
2. Use painter's tape for clean edges
3. Apply primer for better adhesion
4. Paint in W-pattern for even coverage
5. Allow proper drying time between coats

Keep your gutters flowing freely to prevent water damage:

1. Set up a secure ladder
2. Remove large debris by hand
3. Use a garden hose to flush remaining debris
4. Check downspouts for clogs
5. Inspect for damage and repair as needed

Seal air leaks around doors and windows to improve energy efficiency:

1. Clean the door/window frame
2. Measure and cut weather stripping
3. Apply adhesive-backed stripping
4. Test door/window operation
5. Adjust if needed for proper seal